DIY: Up-cycled Filing Cabinet

I found this busted up beauty last weekend at a yard sale,

and I knew she was going to be the perfect addition to my new office.

All she needed was a fork lift to get her home, 

because she ways a metric shit ton,

some TLC and elbow grease.

See that $10 price tag?

I talked them down to $5 and convinced them to load it into 

my car for me.

The frist step to bringing this cabinet back to life was to remove all of the hardware.

I knew that it was missing pieces and that I was going to have to 

replace all of the handles.

Once every thing was taken apart,

I got super sweaty and dirty giving this giant hunk of 

metal a really good sanding.

Using a medium to coarse grit paper. 

I used circular motions

(think Karate Kid)

and really concentrated my attention

to the areas that were rusty.

After sanding, I used a wet rag to remove all of the dust.

It took a few good wipe downs to really make sure that I got it all,

and the last cleaning I used mineral spirits and a dry rag.

Once all the surfaces were thuroughly cleaned,

I used a spray paint primer to cover the entire cabinet.

I also salvaged the label holders off the front of the drawers and sprayed them flat black.

The original cabinet had spindles that ran inside each drawer, but one was missing.

I opted to just fill the hole with a screw, hex nut, and acorn nut for decorative purposes. 

Lastly I sprayed the cabinet this beautiful and cheery

Marigold color and started calling it my happy cabinet.

After the paint had a full 24 hours to dry,

I put on all the hardware and labels.

This was such an easy project that really brought a dead piece of furniture 

right back to life, and provided so much storage and sunshine in my office.